What equipment does the mixing and pouring system of the polystyrene concrete block production line consist of? The following engineer will tell you about this issue. The mixing production line mainly consists of 10 major equipment:
1. Cement weighing system: composed of weighing bucket, weighing sensor, pneumatic butterfly valve, pneumatic vibrator, screw conveyor, etc.
2. Fly ash weighing system: the same as the cement weighing system
3. Water weighing system: composed of water weighing bucket, weighing sensor, pneumatic butterfly valve, water pump, water channel
4. Foaming agent system: composed of foaming agent storage tank, foaming agent weighing bucket, weighing sensor, pneumatic butterfly valve, corrosion-resistant pump, foaming machine, pipeline
5. Polystyrene particle conveying system: composed of centrifugal fan, pipeline, metering bin, pneumatic butterfly valve, pneumatic vibrator, etc.
6. Vertical mixing system: The vertical mixer consists of a tank body, a mixing device, and a drive device , pneumatic butterfly valve, etc.; the mixing blades are divided into two layers. Under the high-speed operation of the main shaft, two upper and lower beams are formed in the area. The slurry shears, rolls and impacts each other, effectively dispersing and dissolving cement and fly ash in water, and quickly mixing them evenly.
7. Single-horizontal screw ribbon mixer, the mixing blade is screw ribbon type, pneumatic gate valve opening, shaft-mounted reducer transmission, multiple shaft end seals to avoid shaft end leakage, the use of pneumatic gate valve can avoid leakage caused by slurry sticking to the door opening device; screw ribbon blades can quickly press polystyrene particles and foam into cement slurry for mixing. The three layers of screw ribbons convey in opposite directions. The outer layer of screw ribbon gathers the materials from both sides to the middle, and the inner layer of screw ribbon conveys the materials from the center to both sides, forming a low-power and high-efficiency mixing environment, which will not destroy the morphology of EPS particles and can quickly mix the slurry evenly.
8. Cement and fly ash supply system: composed of powder tank (prepared by the customer), powder tank accessories, and screw conveyor
9. Centralized control system: composed of operation cabinet, high-voltage cabinet, touch screen, electrical components, etc., centralized control of mixing raw material supply, raw material metering, mixing, and discharge, which can be automatically/manually controlled
10. Polystyrene particle production: EPS foaming machine, polystyrene particle storage bin is prepared by the customer
